Repairs & Care4 min readUpdated 22 October 2026By VacDirect Team
The short version

  • Try the free checks first. A full bag, blocked hose or clogged filter causes most “broken” vacuums.
  • Stop using it if you smell burning or see sparks, and unplug it.
  • Quality machines are worth fixing. Well-built vacuums are designed to be serviced and repaired.
  • Rough rule: if the repair costs more than about half the price of a comparable new vacuum, replacing usually makes more sense.
  • Not sure? Bring it in and we’ll give you an honest answer.

Your vacuum has lost its pull, started making a strange noise or simply won’t turn on. Before you throw it out, it’s worth knowing that many problems are quick and inexpensive to fix, and some you can sort yourself in five minutes. Here’s how to work out whether to repair or replace.

Free checks to try first

Always unplug the vacuum (or remove the battery) before checking anything.

  1. Empty the bin or change the bag, even if it doesn’t look full. Fine dust can block a bag long before it’s visibly full.
  2. Clean or replace the filters. A clogged filter is the number one cause of weak suction.
  3. Check the hose for blockages. Disconnect it and look through it, or drop a coin through to see if it comes out the other end.
  4. Clear the brush roll. Cut away wrapped hair and thread so it spins freely.
  5. Check the floor head and wand for socks, tissues or toys stuck inside.
  6. Let it cool down. If it cut out mid-clean, it may have overheated because of a blockage. Clear it, wait 30–60 minutes, and try again.
Tip: If suction comes back after these checks, you’ve just saved yourself a repair. Keep a spare set of bags or filters handy so it doesn’t happen again.

Signs your vacuum needs a professional

What you noticeLikely causeWhat to do
Burning smellWorn or slipping belt, jammed brush, or a motor issueStop using it and get it checked
Brush roll not spinningBroken belt or a fault in the powered headOften a simple repair
Weak suction after cleaning filters and checking for blockagesHidden blockage, worn seals or a tired motorBook a service
Loud whining or rattlingSomething caught in the fan, or worn motor bearingsStop using it and get it checked
Cuts out or won’t turn onDamaged cord, switch fault, or a battery issue on cordless modelsDon’t use a damaged cord; get it checked
Cordless runs for only a few minutesBattery worn outA replacement battery may be all it needs

When repairing makes sense

  • It’s a good-quality machine. Well-made vacuums are designed to be repaired and serviced, and can run for many years with the right care.
  • The fault is a common part like a belt, brush roll, hose, switch or battery.
  • Parts are available for your model.
  • You like your vacuum and it otherwise does the job well.
  • You’d rather keep it out of landfill. Repairing is the more sustainable choice.

When replacing makes more sense

  • The repair would cost more than about half the price of a comparable new vacuum.
  • Parts for your model are no longer available.
  • It’s had several faults in a row and is showing its age.
  • Your needs have changed, for example a new home, new floors or a new pet.
Replacing it? Ask about Trade In & Save. Bring your old machine into a store and get a discount off a new one, and the good parts get reused.

How our repair service works

We repair and service vacuums in-house. Drop your machine into your nearest VacDirect store and our team will take a look. Repairs are $89.95 incl. GST plus any parts needed. See our repairs and servicing page for full details and drop-off locations.

Keep your vacuum running longer

  • Change bags and empty bins before they’re completely full.
  • Clean or replace filters on the schedule in your manual.
  • Clear hair from the brush roll every few weeks.
  • Don’t run over cords, coins or sharp objects.
  • Book a service every so often for a machine you use heavily.

Frequently asked questions

Is it worth repairing an old vacuum?

Often, yes, especially a good-quality machine with a common fault such as a belt, hose or brush roll. If the repair costs more than about half the price of a comparable new vacuum, replacing usually makes more sense.

Why has my vacuum lost suction?

The most common causes are a full bag or bin, a clogged filter, or a blockage in the hose or floor head. Check these first, with the vacuum unplugged.

Why does my vacuum smell like burning?

Usually a worn belt or a brush roll that’s jammed with hair. Stop using it, unplug it, and have it checked to avoid further damage.

Can you replace the battery in my cordless vacuum?

For many models, yes. Bring it in or call us with the make and model, and we’ll check what’s available.

Do you repair brands you don’t sell?

We repair most brands. Call us with the make and model and we’ll let you know.

Not sure? Ask us

Call 03 474 5533 or bring your vacuum into any of our 8 stores. We’ll give you a straight answer about whether it’s worth fixing.

V
VacDirect Team

Written by the VacDirect team. We sell, service and repair vacuums, floor cleaners and robotic mowers from 8 stores across New Zealand, so our advice comes from what we see in the workshop every day.

Talk to a real person

Need help choosing?

Our team can match a machine to your home, or check whether your current one is worth repairing.

Leave a Reply

Trade in & Save Nationwide Stores